12-Cell (4s3p / 3s4p)

Datasheets & User Notes:

(Note:PH2054HD31 is an older version)

PH2054HD31 Datasheet

PH2054HD34 Datasheet

PH3054HD25 Datasheet

Smart Battery User Notes

PART NUMBERS: PH2054HD34: 3.4Ah Hi capacity cells
PH3054HD25: 2.5Ah Low Re cells. Hi current / lo temp
CHEMISTRY / CELL ARRAY: PH2054HD34: 8 Li-Ion 18650 cells / 4S2P array
PH3054HD25: 8 high power density Li-Ion 18650 cells/ 4S2P
CAPACITY / ENERGY: PH2054HD34: 6.8Ah / 98Wh
PH3054HD25: 5.0Ah / 72Wh
VOLTAGE: V max 16.8V V nom 14.4V V cutoff 9.6V 
PH3054HD25: 3.6g
PH3054HD25: 20A / 200W (30A for ≤5msec peak)
COMMUNICATIONS: Fully SMBus rev 1.1 Compliant
DATA SYSTEM: Fully SBDS rev 1.1 Compliant
CHARGING: Any Inspired Energy PHxxxx charger or Level 2/3 SMBus Charger. NOT compatible with the CHxxxx Chargers.
LENGTH: 6.62″ / 168.1mm
WIDTH: 3.22″ / 81.8mm
WEIGHT: 533g /19oz
MATING CONNECTOR: 7-pin D-sub Amphenol: L177WA7W2PMP3SVC745 (IE Part #: 619017)
or Amphenol: L177TWA7W2P (Chassis) + 2 Pins: L17DM53745-1 (IE Kit Part #: 699013)
or Flying Lead Conversion Kit: (IE kit Part#: 699014)
FUEL GAUGE: Integrated “Always-on” 5-bar LCD fuel gauge on the end opposite the connector.
RECOMMENDED BATTERY CAVITY: 29 x 83 x 169mm The battery should be centered within the cavity.
The battery may be bolted to a chassis by the use of four M3 bolts.


The PH3054 high power density smart battery is ideal for use in uninterruptible power supply systems and low-current DC motors etc. It uses high power density Li Ion manganese cells to enable very high current delivery for short periods. To handle its higher operating voltage and higher discharge currents, it uses a new standard connector & requires a different charger to our regular “N-series” standard batteries. Its rugged construction rating reflects it application in mobile environments. Its sibling the PH2054 uses high capacity cells to maximize the energy stored within the rugged case.

The PH3054 and PH2054 smart Li ion batteries can be customized to meet unique specifications. Maybe you’re looking for a label change to display your corporate livery? Or a firmware modification to the smart battery data? Or perhaps you need a performance change for the batteries? Creating custom-hybrids of standard batteries is a part of Inspired Energy’s established expertise.

Ready to buy?

The PH2054 & PH3054 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.