Ni2040 / Ni3040

PRODUCTS

12-Cell (4s3p / 3s4p)

Datasheets & User Notes:

(Note: The Ni2040A24, and HD24 are old products. Red
links coming soon)

Ni2040ED29 Datasheet

Ni2040HD24 Datasheet

Ni2040HD29 Datasheet

Ni3040HD25 Datasheet

Ni3040QE30 Datasheet

Smart Battery User Notes

 

Edit
Ni2040 SPECIFICATION SUMMARY
PART NUMBER(S): Ni3040HD25 – 2.5Ah Low Re cells, Lo temp
Ni2040HD29 – 2.9Ah cells
Ni2040ED29 – 2.9Ah cells, Hi Current / Hi Capacity
CHEMISTRY / CELL ARRAY: 9 Li-Ion 18650 cells / 3S3P array
CAPACITY / ENERGY: Ni3040HD25 – 7.5Ah / 81Wh
Ni2040HD29 – 8.7Ah / 93Wh
Ni2040ED29 – 8.7Ah / 93Wh
VOLTAGE: V max 12.6V V nom 10.8V V cutoff 7.2V 
EQUIVALENT LITHIUM CONTENT: ≤7.8g
MAX CONTINUOUS DISCHARGE: Ni3040HD25 – 10A / 70W
Ni2040HD29 – 6A / 45W
Ni2040ED29 – 8A / 60W
COMMUNICATIONS: Fully SMBus rev 1.1 Compliant
DATA SYSTEM: Fully SBDS rev 1.1 Compliant
CHARGING: Any Inspired Energy CHxxxx charger or Level 2/3 SMBus Charger. The Linear Tech LT4100 chip is recommended.
PHYSICAL DIMENSIONS: HEIGHT: 22.4 mm, 0.9″
LENGTH: 214.6 mm, 8.5″
WIDTH: 58.9 mm, 2.4″
WEIGHT: 496g, 1lb 2oz
MATING CONNECTOR: Std. 5-position, 5mm centerline. Mating Conn. list
FUEL GAUGE: Integrated “Always-on” 5-bar LCD fuel gauge on the end opposite the connector.
RECOMMENDED BATTERY CAVITY: 23.5mm x 60mm cross section. The battery should be centered within this cavity.
National / Nato Stock Numbers: Ni2040MG24 : 6140015629168

Ni2040 & Ni3040 DESCRIPTION:

The Ni2040 and Ni3040 are ideal for low temperature applications as the low internal impedance enables the cells to deliver good capacity and discharge current.  The Ni2040 can preforms as low as -10°C and the Ni3040 has tested as low as -30°C (Note, in cases of low temperature applications, we strongly recommend all batteries be tested in the intended environment to discern specific performance levels). Also, with its 8A/10A discharge capability, the Ni2040ED29 and Ni3040HD25 are ideally suited as a small “hot-swap” battery to hold up the device for a short period while the main battery is changed.

The Ni2040 and Ni3040 smart Li ion batteries can be customized to meet unique specifications. Maybe you’re looking for a label change to display your corporate livery? Or a firmware modification to the smart battery’s data? Or perhaps you need a performance change for the batteriesy? Creating custom-hybrids of standard batteries is a part of Inspired Energy’s established expertise.

Ready to buy?

The Ni2040 and Ni3040 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.