Ni2020 / Ni3020


12-Cell (4s3p / 3s4p)
PART NUMBERS: Ni3020HD25 – 2.5Ah Low Re cells, Lo Temp / Hi Current
Ni2020HD29 – 2.9Ah cells
Ni2020ED29 – 2.9Ah cells hi Current
CHEMISTRY / CELL ARRAY: 9 Li-Ion 18650 cells / 3S3P array
CAPACITY / ENERGY: Ni3020HD25 – 7.5Ah / 81Wh
Ni2020HD29 – 8.7Ah / 94Wh
Ni2020ED29 – 8.7Ah / 94Wh
VOLTAGE: V max 12.6V V nom 10.8V V cutoff 7.2V 
Ni2020HD29 – 6A / 45W
Ni2020ED29 – 8A / 60W
COMMUNICATIONS: Fully SMBus rev 1.1 Compliant
DATA SYSTEM: Fully SBDS rev 1.1 Compliant
CHARGING: Any Inspired Energy CHxxxx charger or Level 2/3 SMBus Charger. The Linear Tech LT4100 chip is recommended.
LENGTH: 149.1 mm, 5.9″
WIDTH: 89.2 mm, 3.5″
WEIGHT: 470g, 1lb 1oz
MATING CONNECTOR: Std. 5-position, 5mm centerline.
FUEL GAUGE: 4-LED fuel gauge + push-button
RECOMMENDED BATTERY CAVITY: 21mm x 90 mm cross section. The battery should be centered within this cavity.
NSN: NATIONAL / NATO STOCK NUMBERS: Ni2020 NSN: 6140015682673 (Obsolete, Use Ni2020ED29)
Ni2020A24 NSN: 6140015686834 (Obsolete, Use ED29)
Ni2020HD24 NSN: 6140015905433
Ni2020ED26 NSN: 6140015731871 (Obsolete, Use ED29)
Ni2020TS24 NSN: 6140015795111

Ni2020 & Ni3020 DESCRIPTION:

The Ni2020 and Ni3020 are ideal for low temperature applications as the low internal impedance enables the cells to deliver good capacity and discharge current.  The Ni2020 can preforms as low as -10°C and the Ni3020 has tested as low as -30°C (Note, in cases of low temperature applications, we strongly recommend all batteries be tested in the intended environment to discern specific performance levels). Also, with its 8A/10A discharge capability, the Ni2020ED29 and the Ni3020HD25 are ideally suited as a small “hot-swap” battery to hold up the device for a short period while the main battery is changed.

The Ni2020 and Ni3020 smart Li ion batteries can be customized to meet unique specifications. Maybe you’re looking for a label change to display your corporate livery? Or a firmware modification to the smart battery’s data? Or perhaps you need a performance change for the batteries? Creating custom-hybrids of standard batteries is a part of Inspired Energy’s established expertise.

Ready to buy?

The Ni2020 and Ni3020 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.