ND2037 / ND3037
8-Cell (4s2p / 8s1p)
P Series Chargers
4-cell (1s4p, 2s2p, 4s1p)
6-Cell (2s3p / 3s2p)
8 Cell (2s4p / 4s2p)
12-Cell (4s3p / 3s4p)
N-Series Battery Chargers
Embeddable Charger Boards: Please contact us for details of our single & dual bay charger boards
|ND2037 / ND3037 SPECIFICATION SUMMARY|
|PART NUMBERS:|| ND3037HD25 – 2.5Ah Lo R e cells, Lo Temp / Hi Current
ND2037HD34 – 3.4Ah cells, Hi Capacity
|CHEMISTRY / CELL ARRAY:||4 Li-Ion 18650 cells in a 2S2P array|
|CAPACITY / ENERGY:|| ND3037HD25 – 5.0Ah / 29Wh
ND2037HD34 – 6.8Ah / 49Wh
|VOLTAGE:||V max =8.4V V nom =7.2V V cutoff =4.8V |
|EQUIVALENT LITHIUM CONTENT:||≤4g|
|MAXIMUM CONTINUOUS DISCHARGE:||ND3037HD25 10A / 50W
ND2037HD34 8A / 40W
|COMMUNICATIONS:||Fully SMBus rev 1.1 Compliant|
|DATA SYSTEM:||Fully SBDS rev 1.1 compliant|
|CHARGING:||Any Inspired Energy CHxxxx charger or Level 2/3 SMBus Charger. The Linear Tech LT4100 chip is recommended.|
|DIMENSIONS:||HEIGHT: 0.9″ / 23mm
LENGTH: 6.0″ / 153mm
WIDTH: 1.7″ / 42mm
WEIGHT: 230g / 8.1oz
|MATING CONNECTOR:||Std. 5-position, 5mm centerline. Mating Conn. list|
|FUEL GAUGE:||Integrated “Always-on” 5-bar LCD fuel gauge on the end opposite the connector.|
|RECOMMENDED BATTERY CAVITY:||24 x 43mm cross-section. The battery should be centered within this cavity.|
ND2037 & ND3037 DESCRIPTION:
The ND2037 and ND3037 are ideal for low temperature applications as the low internal impedance enables the cells to deliver good capacity and discharge current. The ND2037 can preforms as low as -10°C and the ND3037 has tested as low as -30°C (Note, in cases of low temperature applications, we strongly recommend all batteries be tested in the intended environment to discern specific performance levels). Also, with their 8A or 10A discharge capability, the ND2037 and ND3037 are ideally suited as a small “hot-swap” battery to hold up the device for a short period while the main battery is changed.
The ND2037 and ND3037 smart Li ion batter(ies)y can be customized to meet unique specifications. Maybe you’re looking for a label change to display your corporate livery? Or a firmware modification to the smart battery’s data? Or perhaps you need a performance change for the batter(ies)y? Creating custom-hybrids of standard batteries is a part of Inspired Energy’s established expertise.
Ready to buy?
The ND2037 & ND3037 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.
Inspired Energy, LLC
25440 NW 8th Place, Newberry, FL 32669 USA
Toll Free: 888-546-7747