ND2034 / ND3034

PRODUCTS

12-Cell (4s3p / 3s4p)

Datasheets & User Notes:

(Note: The ND2034HD29, and HD31 are old models. Red
links coming soon.)

ND2034HD29 Datasheet

ND2034HD31 Datasheet

ND2034HD34 Datasheet

ND3034HD25 Datasheet

ND3034HD30 Datasheet

Smart Battery User Notes

 

Product Pic
Edit
ND2034 / ND3034 SPECIFICATION SUMMARY
PART NUMBERS: ND3034HD25 – 2.5Ah Lo R e cells, Hi Current / Lo Temp
ND2024HD30 – 3.0Ah Lo R e cells, Hi Current
ND2034HD34 – 3.4Ah cells, Hi Capacity
CHEMISTRY / CELL ARRAY: 4 Li-Ion 18650 cells in a 4S1P array
CAPACITY / ENERGY: ND3034HD25 – 2.5Ah / 29Wh
ND3034HD30 – 3.0Ah / 43Wh
ND2034HD34 – 3.4Ah / 49Wh
VOLTAGE: V max 16.8V V nom 14.4V V cutoff 9.6V 
EQUIVALENT LITHIUM CONTENT: ≤4g
MAXIMUM CONTINUOUS DISCHARGE: ND3034HD25 – 10A / 100W
ND3034HD30 – 10A / 100W
ND2034HD34 – 4A / 40W
COMMUNICATIONS: Fully SMBus rev 1.1 Compliant
DATA SYSTEM: Fully SBDS rev 1.1 compliant
CHARGING: Any Inspired Energy CHxxxx charger or Level 2/3 SMBus Charger. The Linear Tech LT4100 chip is recommended.
DIMENSIONS: HEIGHT: 0.9″ / 23mm
LENGTH: 6.0″ / 153mm
WIDTH: 1.7″ / 42mm
WEIGHT: 230g / 8.1oz
MATING CONNECTOR: Std. 5-position, 5mm centerline. Mating Conn. list
FUEL GAUGE: Integrated “Always-on” 5-bar LCD fuel gauge on the end opposite the connector.
RECOMMENDED BATTERY CAVITY: 24 x 43mm cross-section.  The battery should be centered within this cavity.

ND2034 & ND3034 DESCRIPTION:

The ND2034 and ND3034 are ideal for low temperature applications as the low internal impedance enables the cells to deliver good capacity and discharge current.  The ND2034 can preforms as low as -10°C and the ND3034 has tested as low as -30°C (Note, in cases of low temperature applications, we strongly recommend all batteries be tested in the intended environment to discern specific performance levels). Also, with its 10A discharge capability, the ND3034 is ideally suited as a small “hot-swap” battery to hold up the device for a short period while the main battery is changed.

The ND2034 and ND3034 smart Li ion batteries can be customized to meet unique specifications. Maybe you’re looking for a label change to display your corporate livery? Or a firmware modification to the smart battery’s data? Or perhaps you need a performance change for the batteries? Creating custom-hybrids of standard batteries is a part of Inspired Energy’s established expertise.

Ready to buy?

The ND2034 and ND3034 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.