BATTERY PACKS GREATER THAN 100 WATT.HOURS

PRODUCTS

12-Cell (4s3p / 3s4p)

Datasheets

QK490 Datasheet

 

High Energy Li-Ion Systems: Beyond 100Wh

Li Ion batteries above 100Wh present some significant difficulties in shipping. In addition larger energy storage systems benefit from using a modular approach rather than a single huge battery. Thats why the ideal way to approach this is to use an array of sub-100Wh battery packs. The smart battery communications in each battery pack allows an array controller to individually monitor and control the charge and discharge on each battery in the array. To the outside world, the battery array operates like a single extremely high energy battery pack, internally the battery array benefits from the lower costs of using smaller modules which are non-regulated for shipping purposes and can be shipped as non-hazardous goods. The architecture is modular and can be scaled from a simple 180Wh, two-battery system, up to a 1kWh system or beyond. With a DC converter on the output, the battery can supply DC voltages from 3.3V up to 96.0V.

Ready to buy?

The QK490 is designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.