Ni1030 & NJ1020

PRODUCTS

12-Cell (4s3p / 3s4p)
Edit
Ni1030 & NJ1020 Specification Summary
PART NUMBERS: Ni1030CT 10.8V, 3.85Ah, 41.6Wh
NJ1020 12.0V, 3.85Ah, 46WH
CHEMISTRY/CELL ARRAY: Nickel-Metal Hydride
CAPACITY/ENERGY: 3850mAh
VOLTAGE: Ni1030: 10.8V
NJ1020: 12V
MAX CONTINUOUS DISCHARGE:
COMMUNICATIONS: Fully SMBus rev 1.1 Compliant
DATA SYSTEM: Fully SBDS rev 1.1 Compliant
CHARGING: “CHXXXX” range desktop charger or other SMBus Level 3 compliant charger
PHYSICAL DIMENSIONS: Ni1030 NJ1020
HEIGHT: 19.3mm HEIGHT: 20mm
LENGTH: 215.0mm LENGTH: 149.4mm
WIDTH: 52.8mm WIDTH: 89.1mm
WEIGHT: 508g/1lb 2oz WEIGHT: 592g/1lb 5oz
REC. BATTERY CAVITY: Ni1030: 21mm x 54mm cross section. The battery should be centered within this cavity.
NJ1020: 21mm x 90mm cross section. The battery should be centered within this cavity

Ready to buy?

The Ni1030 & NJ1020 are designed and built in the USA by Inspired Energy, Inc.
Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.