ATA004N & ATA005P

PRODUCTS

12-Cell (4s3p / 3s4p)

Instructions & Downloads:

ATA004N-5P Instructions

ATA004N-5P Installation

(Note: ONLY CLICK ONCE; May take a moment to begin)

ATA004N-5P Specification Summary
COMPONENT PARTS: USB-to-SMBus smart battery interface with “Y” USB/Battery cable
PC COMPATIBILITY: PC with Windows 7 or higher, 1 MB hard disk space, 64MB memory, 1 Free USB Port
PRODUCT COMPATIBILITY: All Inspired Energy “N” Series SMBus Smart Battery System products
COMMUNICATIONS: Fully SMBus Compatible
DATA SYSTEM: Conforms to Smart Battery Specification

ATA004 DESCRIPTION:

The ATA004N and ATA005P are diagnostic tool which can be used to view the data fields stored by Inspired Energy smart battery packs. It uses a standard USB port with software written by Inspired Energy, to display the battery data on any personal computer. The unit can be used to view and record static battery data, or to log dynamic battery data while the battery is charging or discharging. This makes it an invaluable tool for embedded system designers who are implementing a device-level smart battery interface, system testing, SMBus communications troubleshooting and battery state of health determinations. The ATA004N & ATA005P can also be used to write to those battery data fields which support external input.

Supported Data Feilds

 Average Charge Time (mins)
Manufacturer’s Access*
Device Chemistry
Remainging Capacity Alarm*
Manufacturer’s Data
Remaining Time Alarm*
Absolute State of Charge (%)
Battery Mode*
Remaining Capacity (mAh)
At Rate*
At Rate OK
Full Charge Capacity (mAh)
At Rate Time to Full
Run Time to Empty (mins)
At Rate Time to Empty
Avg Time to Empty (mins)
Avg Time to Full (mins)

 

Temperature (°K & °C)
Charge Current (mA)
Terminal Voltage (mV)
Charge Voltage (mV)
Current (mA)
Battery Status
Average Current (mA)
Cycle Count
Max Error (%)
Design Capacity (mAh)*
Relative State of Charge (%)
Design Voltage (mV)
Serial Number
Smart Battery Version #
Manufacturer’s Name
Date Of Manufacture
Device Name

* Denotes user configurable fields

Ready to buy?

Inspired Energy manufactures all products to order, and we sell direct to clients globally in quantities from 1 to 50,000+.
We accept credit cards for small orders & samples.
If you are interested in purchasing our products, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352-472-4855 or use the current email address shown on our contact us page.

Inspired Energy, LLC

25440 NW 8th Place, Newberry, FL 32669 USA

P: 352-472-4855

Toll Free: 888-546-7747

P-Series batteries use a high-current, 7-pin D-sub connector. They are more rugged than the N-Series batteries - some of them are IP65-rated - they also are optimized for using cells with low internal impedance which excel in low temperature and high discharge current applications. They require the use of a "PH" series charger.
N-Series batteries use a 5-blade standard battery connector. They are optimized for using high capacity cells for maximum runtime. They require the use of a "CH" series charger.