4 &6 Bay chargers

4 Bay & 6 Bay Smart Charger Systems

4 &6 BAY CHARGERS Specification Summary

physical dimensions:

HEIGHT: 126mm / 5.0"
LENGTH: 400mm / 15.75"
WIDTH: 200mm / 8.0"
WEIGHT: 4-Bay units: 3.1kg / 6.9lb, 6-Bay units: 3.5kg / 7.2lb

LED Status Displays:

Each charger unit has an LED charge indication display as shown on the instruction sheet

Power Supply:

90-260VAC, 50-60Hz input, 24VDC, 2.5A output
UL listed, CE Compliant

Mains Cord

90-260VAC, 50-60Hz input, 24VDC, 2.5A output
UL listed, CE Compliant

4 & 6 Bay Charger Description

The 6-bay unit contains 6 simultaneous charger/calibrators. The 4-bay desktop smart charger system can be ordered as any combination of charger/calibrators or chargers only.

Unlike other multi-bay charging systems, the 4 & 6-bay desktop smart charger systems will charge all the batteries at the same time, thus reducing the cycle time for multi-battery applications.

The Multi-bay desktop smart charger systems work with every "N" series standard Li Ion and NiMH battery in the Inspired Energy Portfolio - irrespective of size, shape, voltage, or capacity.

Special versions of these multi-bay chargers are available or shipping in compliance with IATA regulations. 

Creating a part number for your multi-bay charging system:
CH6555 -          6 Charger/Calibrator bays
CH6555CAL -   6 Charger/Calibrator bays which will adjust the battery charge to <30% for shipping
CH5555 -        4 Charger/Calibrator bays
CH5555CAL -  4 Charger/Calibrator bays which will adjust the battery charge to <30% for shipping
CH5544 -         2 Charger/Calibrator bays. + 2 Charger bays
CH5444 -        1 CH5000 Charge/Calib. + 3 x CH4000 Chgr. NSN: 6130015589431
CH4444 -        4 x CH4000 Charger units

Having created the basic part number, now add your choice of international variant by choosing a suffix.
CHxxxxA - US/North American 3-pin AC plug
CHxxxxE - European 2-pin AC Plug
CHxxxxU - UK 3 Pin AC Plug

National Stock Numbers / NATO Stock Numbers: CH5444 NSN: 6130015589431

International Variants:
With its multi-voltage power supply, the multi-bay system works throughout the world. Variants are available for use in North America (Add suffix "A" to the part number) Europe (Add suffix "E" to the part number), and the UK (Add suffix "U" to the part number)

Operation of the CH6555CAL and CH5555CAL is as follows:
To set the battery state of charge at ≤30% for shipping:
Place the battery into the slot. The battery state of charge will be automatically adjusted (by charging or discharging). When the green LED stops flashing & remains solid, the battery is at ≤30% SoC.

To recalibrate the fuel gauge & charge to 100%:
Place the battery into the slot & press the recalibrate button. When the blue LED stops flashing & remains solid, calibration is complete & the battery will be fully charged. Note: recalibration times are long. Do not remove the battery part way through or the process will need to re-start

The power supply used is UL Listed and CE certified. Each individual charger unit also complies with CE & FCC immunity & emissions standards. RoHS Compliant.

Recharge Times:
Different battery packs will require differing recharge times. The times given below are for a full charge from 0% to 100% state of charge. They are valid for all variants and custom hybrids of each battery model. (For example the NJ1020HP has the same recharge time as the NJ1020.

If you are interested in purchasing a standard battery pack, or receiving a quotation please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747) or USA 352 472 4855
or use the current email address shown on our contacts page.