|
BP2Dxxyy Specifications |
| Weight: |
270g / 9.5oz |
| Thickness: |
35mm / 1.4" |
| Length: |
200mm / 8.0" |
| Width: |
125mm / 4.9" |
| Mounting: |
1½" wide belt loop plus 4 "D" rings |
| Material: |
Padded, reinforced, rip-stop nylon |
| Cable: |
2 conductor, coiled cable. 6" straight at either end with 1' of coiled conductor. Extends to ~5'.
No DC connector fitted at the device end.
|
| Fuel Gauge: |
4 LEDs in the DC:DC converter - visible through a clear window in the beltpack. The fuel gauge operates automatically during discharge |
| Output Voltage: |
Available to order in the ranges 13V to 24V @ 60W and 24V to 48V at 20W |
| Output power: |
60 watts maximum continuous drain |
| Recommended Battery: |
NL2020HD22 |
Click here to view accessories, spares & replacements for Inspired Energy Products
BP2D Certifications:
- Will comply with CE & FCC immunity & emissions standards.
- RoHS compliant RoHS Declaration
Description:
The BP2D range of products consists of a soft padded nylon pouch with a DC to DC converter and fuel gauge indicator built into the battery connector.
These products are designed to work with the 10.8V, 95Wh NL2020HD22 high current discharge battery pack.
The regulated DC output is rated at 60Watts continuous up to 24V.
Solid inserts provide structure to the case and protection for the battery.
With the addition of a foam insert, the belt packs also accept the smaller NI2020HD 78Wh battery packs.
The required DC voltage must be specified prior to ordering the device.
If a DC connector is required to be fitted at the device-end of the cable, this must be specified prior to ordering, and may be subject to minimum order quantities.
Part Numbers: BP2Dxxyy
BP2D indicates a Belt Pack with 2 core cable and DC voltage regulation.
"XX" is used to indicate the required DC output voltage
"YY" is used to indicate the DC connector fitted at the device end. The default value of "01" indicates an un-terminated cable
Example: BP2D1601 is a Beltpack with 2-core coil-cable and regulated DC output voltage of 16V supplied without a connector at the device-end.
What's in the Box?
- A padded ripstop-nylon beltpouch with a belt loop and 4 "D"rings for alternate mounting. The pouch also includes a window through which the battery fuel gauge can be viewed during operation.
- A 2-conductor coil-cable terminated at the battery end with a combined battery connector + DC:DC converter. The device end is left unterminated unless special-ordered.
Typical uses include auxiliary power through the DC power jack for:
-
Pen tablet computers
-
Cycling and hiking lighting systems
-
Ruggedized computers
-
Military and commercial avionics
-
Industrial data loggers
-
Personal cooling / heating systems
-
Wearable computers
-
Industrial test & measurement systems
For pricing or any additional information about our range of auxiliary power packs, please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747)
or USA 352 472 4855
or e-mail our Sales Department.
|
