|
BC2Dxxyyz Specifications |
| Weight: |
270g / 9.5oz |
| Thickness: |
35mm / 1.4" |
| Length: |
200mm / 8.0" |
| Width: |
125mm / 4.9" |
| Mounting: |
1½" wide belt loop plus 4 "D" rings |
| Material: |
Padded, reinforced, rip-stop nylon |
| Cable: |
2 conductor, coiled cable. 6" straight at either end with 1' of coiled conductor. Extends to ~5'.
No DC connector fitted at the device end.
|
| Fuel Gauge: |
4 LEDs in the DC:DC converter - visible through a clear window in the beltpack. The fuel gauge operates automatically during charge (flashing) and discharge (solid). |
| Output Voltage: |
Available to order anywhere in the ranges 3-8V @ 20W, 13-24V @60W and 25-48V @20W. |
|
Power Supply
|
90-260VAC, 24V, 50W DC, in-line power supply.
UL listed, CE Compliant |
| Mains Cord |
BC2DxxyyA: 110V N. American
3-pin connector
BC2DxxyyE: 220V European
2-pin connector with ground recess
BC2DxxyyU: 240V UK 3-pin connector |
| Recommended Battery: |
NL2020HD22 |
Click here to view accessories, spares & replacements for Inspired Energy Products
BC2D Certifications:
- Will comply with CE & FCC immunity & emissions standards.
- RoHS compliant RoHS Declaration
Description:
The BC2D range of products consists of a soft padded nylon pouch with a smart charger, a DC to DC converter and fuel gauge indicator built into the battery connector. They are designed to work with the 10.8V, 95Wh NL2020HD22 high current discharge battery pack.
The regulated DC output is rated at 60Watts continuous for voltages between 13 & 24V
Solid inserts provide structure to the case and protection for the battery.
With the addition of a foam insert (Part # 935004), the belt packs also accept the smaller NI2020HD 78Wh battery packs.
The required DC voltage must be specified prior to ordering the device.
If a DC connector is required to be fitted at the device end of the cable, this must be specified prior to ordering and may be subject to minimum order quantities.
A battery pack is not included in the assembly - we recommend the NL2020HD22 for use with this system.
Part Numbers: BC2Dxxyyz
BC2D indicates a Belt Charger with 2 core cable and DC voltage regulation.
"XX" is used to indicate the required DC output voltage
"YY" is used to indicate the DC connector fitted at the device end. The default value of "01" indicates an un-terminated cable
"Z" is used to denote the mains power cable. See details of international variants below.
For example BC2D1901E is a Beltpack Charger system with 2-conductor coil cable, 19V regulated DC output, and a European mains cable.
What's in the Box?
- A padded ripstop-nylon beltpouch with a belt loop and 4 "D"rings for alternate mounting. The pouch also includes a window through which the battery fuel gauge can be viewed during charging and discharging.
- A 2-conductor coil-cable terminated at the battery end with a combined battery charger, battery connector + DC:DC converter. The device end is left unterminated unless special-ordered.
- A 50W in-line power supply
- A 6' (~2m) AC mains cable (See below for international variants)
International AC Cable Variants:
BC2DxxyyA: American NEMA 6-15-R Mains plug
BC2DxxyyE: European Schuko CE 7-7 2-pin Mains Plug
BC2DxxyyU: UK BS1363 3 Pin Mains Plug
Typical uses include auxiliary power through the DC power jack for:
-
Pen tablet computers
-
Cycling and hiking lighting systems
-
Ruggedized computers
-
Military and commercial avionics
-
Industrial data loggers
-
Personal cooling / heating systems
-
Wearable computers
-
Industrial test & measurement systems
For pricing or any additional information about our range of auxiliary power packs, please contact us at:
US Toll Free: 1-888-5-INSPIRE (1-888-546-7747)
or USA 352 472 4855
or e-mail our Sales Department.
|
